Print Page | Close Window

ti cooling system plumbing

Printed From: Bavarian-Board.co.uk - BMW Owners Discussion Forum
Category: Technical & Model Specific Forums
Forum Name: BMW '02 Forum
Forum Discription: Ask your '02 Technical questions here
URL: http://www.bavarian-board.co.uk/forum_posts.asp?TID=1485
Printed Date: 14-May-2024 at 17:51


Topic: ti cooling system plumbing
Posted By: alistair
Subject: ti cooling system plumbing
Date Posted: 10-April-2003 at 14:54

When putting side draft carbs on a 2002.  What do you do with the cooling system(internal heater) pipes that went through the intake manifold.

Without, of course, purchasing an expensive bit of pipe from BMW.


Replies:
Posted By: M Tech
Date Posted: 15-April-2003 at 23:06

 

You need a straight adaptor to join up the existing hoses which differ slightly in length.

I had one made by local Engineering firm for a small fee.

Regards

 

Posted By: alistair
Date Posted: 17-April-2003 at 14:17

yes I have found a bit of flexable hose and generic pipe adaptors work a treat. 

The top pipe out of the back of the sensor housing was bunged using a Rosemount wine bottle cork, (or plastic cork substitute).


Print Page | Close Window