2.5 into 2.0?
Printed From: Bavarian-Board.co.uk - BMW Owners Discussion Forum
Category: Regional & Specific Forums
Forum Name: General E30
Forum Discription: E30 Events, etc.
URL: http://www.bavarian-board.co.uk/forum_posts.asp?TID=15181
Printed Date: 18-May-2024 at 16:09
Topic: 2.5 into 2.0?
Posted By: Rich
Subject: 2.5 into 2.0?
Date Posted: 05-March-2005 at 11:00
| Hi guys, hope someone can help with my dilemma! Having previously owned a E30 325 cabrio, and just sold a E36 M3 coupe- im in the position of buying a nice E30 320 cab, and my concern is grunt! Will a 325 engine swop be a fairly straight forward transplant? If not any mods to help the baby straight6? |
Replies:
Posted By: Johnny-Oh
Date Posted: 05-March-2005 at 11:50
|
Hi rich i did this conversion just before christmas. You will need either a 325i ecu or a chip upgrade off the e30zone.co.uk(i think its Ant deals with this.)and the right size inlet bellows(320 is smaller)Gsf parts sell these £12.I swapped my flywheel from my 320 and fitted a new clutch(as the 325 was an auto).You find also 325s run an oil cooler.If you haven't got one just remove the main oil filter housing off the 325 engine block and the threaded stud from your 320(remove oil filter first to reveal this).and swap.Ever thing else is a straight swap.No problems so far after 4 months. HTH John O |
Posted By: Rich
Date Posted: 06-March-2005 at 07:29
| Thanks John, makes me feel better about buying the 320. I'll let you know how I get on- or ask again if im stuck!! |
Posted By: Von Paulus
Date Posted: 17-March-2005 at 16:42
|
I did this job too a couple of yrs ago. I found the best
way was to buy a mechanically good but ropy 325i and just swap the bits over - engine, gearbox (I used the existing 320i loom). The 320i rad was the same and initially I used the 320i diff - but it was so revvy at speed, i soon fitted the 325i diff! It's all nuts and bolts really. P>S the 325i gearbox was a bit growly so I refitted the 320i box and it's fine.  ------------- |