Print Page | Close Window

M30 head, cam removal

Printed From: Bavarian-Board.co.uk - BMW Owners Discussion Forum
Category: Technical & Model Specific Forums
Forum Name: BMW 7 Series
Forum Discription: This forum will deal with any issues on the BMW 7 Series (E23, E32, E38, E65, E66, E67 & E68)
URL: http://www.bavarian-board.co.uk/forum_posts.asp?TID=18457
Printed Date: 26-April-2024 at 10:29


Topic: M30 head, cam removal
Posted By: george chick
Subject: M30 head, cam removal
Date Posted: 03-June-2005 at 09:07

Probably been covered before, but can't search about too much (at work).

Any tips on removing the cam, single handed with cheap tools?

I need to pressure test the head, also heard they can crack under the cams, so need to inspect it anyway.

Haynes manual has something to say about it, but I haven't looked at that for a while.

Oh best place for a head gasket, eurocarparts, gsf or any particular brand?

If I could get hold of BGA or Ultraparts kit at sensible prices I'd try one of theirs.


Replies:
Posted By: eta.
Date Posted: 03-June-2005 at 12:17
Check the price of BM headset first, sometimes they are cheaper. If you are a BMWCC member you get 10% discount.


Print Page | Close Window