Under the bumper
Printed From: Bavarian-Board.co.uk - BMW Owners Discussion Forum
Category: Technical & Model Specific Forums
Forum Name: BMW 6 Series
Forum Discription: This forum will deal with any issues on the BMW 6 Series (E24, E63 & E64)
URL: http://www.bavarian-board.co.uk/forum_posts.asp?TID=21589
Printed Date: 13-May-2024 at 22:18
Topic: Under the bumper
Posted By: AndyS
Subject: Under the bumper
Date Posted: 04-September-2005 at 07:59
|
After Daves discovery of a build up of silt under the bumper end caps
on his highline leading to corrosion I thought I'd have a look at mine. It was a bit of a knuckle skinning excercise finding the hidden bolt under the rear light & the hidden nut under the filler cap but I managed to take it all apart. Joy of joys! Only a heavy dusting & a build up of wax needed removing. I cleaned up & gave it all a good wax.  The tail light aperture was ok but there was a little corrosion on the left. The metal light surround had some aluminium corrosion so they'll need to be cleaned up & repainted at some point. Don't know how much new ones are. Suspect the seals might need replacing too.  I'm going to have a look at the nearside. Hopefully this will be in the same condition. Once I've figured how it all comes apart I'm going to have the bumpers resprayed ready for a rematch with a certain '87 Alfa 75!  ------------- AndyS Live each day as if it's your last - one day it will be. http://www.photostick.co.uk/view-933_BaurSig1.jpg" rel="nofollow"> 
|
Replies:
Posted By: Horsetan
Date Posted: 04-September-2005 at 15:52
|
Amazing. A rust-free rear end. Unreal!!! -------------   
|
Posted By: AndyS
Date Posted: 04-September-2005 at 16:59
Well, so far. I haven't checked the near side yet. The best bit (apart from finding no rust) is that I got to clean off the line of polish residue that had built up over the last 16 years. I was rather surprised to find that the rear valance was steel. I had just assumed it was plastic like the side end caps. Haven't figured out how the middle filler strip below the lights/no. plate comes off. Some well hidden screws no doubt. ------------- AndyS Live each day as if it's your last - one day it will be. http://www.photostick.co.uk/view-933_BaurSig1.jpg" rel="nofollow">
|
Horsetan wrote:Posted By: AndyS
Date Posted: 11-September-2005 at 12:57
|
Well I've just got down to checking the nearside. This is the state of things when the panel was removed.  A quick clean up and it's ready for some wax.  The tail light aperture was fine with no corrosion present. Still can't see how the filler panel between the bumper & rear panel comes off. ------------- AndyS Live each day as if it's your last - one day it will be. http://www.photostick.co.uk/view-933_BaurSig1.jpg" rel="nofollow">
|
Posted By: UKDaveJ
Date Posted: 11-September-2005 at 16:28
|
Nice one Andy! Not jealous at all.....  Dave ------------- My 635's.  
|
Posted By: ron.
Date Posted: 13-September-2005 at 15:44
|
There are two large bolts in the boot that go down through the bumper shock absorbers.Remove these and two small lock bolts on the shock absorber shaft and the whole centre section comes away. ------------- MILI 635 |
Posted By: siscobmw
Date Posted: 14-September-2005 at 12:16
|
A bit offtopic: dear AndyS, I see You've Goodyear GSD3s on Your 635(misano red?)... How do they work on a e24?(better than my trx, ok...Also my cat knows this.... Right or my friend was just wrong? Francesco |
)I was told that "these tyres on a 635 are a waste of money, cause their grip is too much for our E24s, and you can not use all their potential ..You can have the same performance with cheaper and more "relaxed" tyres....".Posted By: AndyS
Date Posted: 14-September-2005 at 12:58
They are indeed Eagle F1's (mk III). Probably are OTT for a 635, especially as I don't really push mine, but it's nice to have a bit of reserve when it comes to grip. My brother recommended them to me as he's a traffic cop & has tried all sorts in all conditions. They are the tyre of choice for Northumbria Police due to good grip/wear balance & they are particularly good in the wet. Handy in the UK! They aren't too costly - £105 for 205/40x17, £117 for 255/40x17 18 months ago. Cheaper than Dunlop, Michelin & Yokohama. Ride is significantly better than the TRX's & I like the cool tread pattern too.  The colour is Misano. Only available on M & Motorsport Edition cars. Almost identical to Helrot Hell Red. Hammerite Smooth Red is a very close match as I discovered when I cleaned up the battery tray! Very handy. Thanks for the bumper tip Ron. ------------- AndyS Live each day as if it's your last - one day it will be. http://www.photostick.co.uk/view-933_BaurSig1.jpg" rel="nofollow">
|
Posted By: siscobmw
Date Posted: 15-September-2005 at 04:07
|
I love Your car....And I love Your alloys, the tyres.... You have good taste!!!!!!!! Can You tell me the style # of those alloys?I can't remember...My brain is worse than my leaver(too much Guinness & Harp, these days...)...and the leaver is worse than my laptop..(system crashes twice a day, at least.... Sisco from Italy! |
)Posted By: AndyS
Date Posted: 15-September-2005 at 14:10
|
They are BMW Style 32's. If I can talk the Mrs into it I'd like to come down to Lake Garda in it. It would be nice to cruise around the area & maybe get over to Como too! ------------- AndyS Live each day as if it's your last - one day it will be. http://www.photostick.co.uk/view-933_BaurSig1.jpg" rel="nofollow">
|
Posted By: siscobmw
Date Posted: 16-September-2005 at 04:41
|
I hope Mrs agree to come in the places near Lake of Como!They're un forgettable places...
|