Print Page | Close Window

E12 based 635 Electric Windows

Printed From: Bavarian-Board.co.uk - BMW Owners Discussion Forum
Category: Technical & Model Specific Forums
Forum Name: BMW 6 Series
Forum Discription: This forum will deal with any issues on the BMW 6 Series (E24, E63 & E64)
URL: http://www.bavarian-board.co.uk/forum_posts.asp?TID=22327
Printed Date: 16-June-2024 at 03:16


Topic: E12 based 635 Electric Windows
Posted By: Jimbob
Subject: E12 based 635 Electric Windows
Date Posted: 23-September-2005 at 06:31

Hi all, I have a new problem (Yay for the 6 series!)

My drivers window has completely stopped working. Initially it slowed down, and then stopped, but would work if "assisted" by one hand, whilst operating the switch with the other (not recommeded when driving!). Now it wont work at all.

I guess I need to get a replacement motor, or recon the broken one, but this might take me a while to source - the guy at Fritzs bits laughed at me when I asked if he had one - then said he can probably find one.

My question is this: are all four window motors the same? If so I will swap the drivers motor with one of the back ones for now, as a back window not working wont stop me getting car park tickets etc.



-------------
And so says Jimbob.
1981 635csi 81k miles. Will be fixed, but not by me.



Replies:
Posted By: spokey
Date Posted: 23-September-2005 at 11:06
I am NOT a mechanic. But I do seem to recall that the front and rear motors are different -- I had to do a set. In fact, I may still have some somewhere. I'll have a look. PM me if you haven't heard from me by Sunday night.

-------------
Ciao,
Spokey



Posted By: Jimbob
Date Posted: 25-September-2005 at 11:58
righto, had the door panel off, and the motor myraculously started working perfectly before I had even touched it. I'm guessing a loose connection or some trim on too tight or something in the way etc. Weird but fine for now... 

-------------
And so says Jimbob.
1981 635csi 81k miles. Will be fixed, but not by me.


Posted By: Horsetan
Date Posted: 25-September-2005 at 18:51

Originally posted by Jimbob Jimbob wrote:

righto, had the door panel off, and the motor myraculously started working perfectly before I had even touched it. I'm guessing a loose connection or some trim on too tight or something in the way etc. Weird but fine for now... 

Maybe it knew you were coming



-------------




Print Page | Close Window