Alpina, AC Schnitzer, Breyton, etc.

Print Page | Close Window

B10 E39 Spoiler

Printed From: Bavarian-Board.co.uk - BMW Owners Discussion Forum
Category: Technical & Model Specific Forums
Forum Name: Alpina, AC Schnitzer, Breyton, etc.
Forum Discription: discuss issues related to BMW Tuning Companys
URL: http://www.bavarian-board.co.uk/forum_posts.asp?TID=29285
Printed Date: 18-April-2024 at 01:29

Topic: B10 E39 Spoiler

Posted By: Monster26
Subject: B10 E39 Spoiler
Date Posted: 11-April-2006 at 15:23

Hi, Just been given an Alpina Spoiler for my B10. I have a problem I haven't got fitting instructions for the spoiler. So I wondering if theres anyone in the Bristol area with a B10 that would let me take some dimensions off their car, so I can fit mine...... hope so.

Thanks in advance,

Mark

Replies:

Posted By: pm9575
Date Posted: 12-April-2006 at 03:59

Mr Monster,

The location of the B10 E39 "rear" spoiler is pretty much easy to determine without a template, as the footprint has a limited area to sit left to right/ or front to back. Just watch the bolt hole locations, as these tend to collect water, and will rust over time.

-------------

Performance ECU Tuning Without a Performance www.reloadmapping.co.uk

Posted By: Monster26
Date Posted: 13-April-2006 at 06:07

Ok mate, what I was planning was to measure off another B10 where the hole centres are from inside the boot.

I thought this would be the best as you can not see the holes in the spoiler when placing the spoiler on the boot. The holes have to line up with the holes in the spoiler.

Thanks for you help :)

Mr Monster (Mark)

Posted By: pm9575
Date Posted: 13-April-2006 at 06:47

Hi Mark,

Either pm or post on forum direct to Stephen Perry, you'll see his name easily enough. I'm sure he'll measure the bolt locations for you of his B10.

-------------

Performance ECU Tuning Without a Performance www.reloadmapping.co.uk

Posted By: stephenperry
Date Posted: 13-April-2006 at 09:06

i'll take some pictures tomorrow so you can see the placement of the spoiler and you can let me know what you need measured from the photos

-------------

2007 Ford Mondeo 2.0 TDCI Titanium X Auto

1983 Ford Sierra XR4i

Posted By: Monster26
Date Posted: 17-April-2006 at 14:10

Thanks Stephen, that would be great if you can do that. I need a picture of the tailgate open with the bolt holes on either side with dimensions, not sure where best to take them from though. Thanks again.

Mark

Print Page | Close Window