E36 3t ALARM Problem. Im Immobilised!
Printed From: Bavarian-Board.co.uk - BMW Owners Discussion Forum
Category: Technical & Model Specific Forums
Forum Name: BMW 3 Series
Forum Discription: This forum will deal with any issues on the BMW 3 Series (E21, E30, E36, E46, E90, E91 & E92)
URL: http://www.bavarian-board.co.uk/forum_posts.asp?TID=29287
Printed Date: 05-May-2024 at 10:27
Topic: E36 3t ALARM Problem. Im Immobilised!
Posted By: schteev
Subject: E36 3t ALARM Problem. Im Immobilised!
Date Posted: 11-April-2006 at 17:01
|
I have a BMW 325i e36. The alarm is a 3T.
Pictures here: http://www.schteev.pwp.blueyonder.co.uk/3t1.jpg http://www.schteev.pwp.blueyonder.co.uk/3t2.jpg It started going faulty a few months back. The key fob got weaker and weaker, even with battery changes. I was having to open the door and turn it off with the fob inside the car. [V] That fob failed. So i started using the second. But for some reason the second started eating batteries, and needed a new set every 2 days. I went on holiday and left the car with the alarm not set. When i got back last week the red LED was out, and the key fob would not operate it at all. Tried fresh batteries. Nothing. LED on the fob indicates its working, LED in the car doesn't respond. The doors don't open / close and the lights don't flash to show its being set. The car is imobilised and i can't do anything to dissable the alarm. I took the alarm box out from behind the drivers side compartment and opened the tamper proof box. Its a 3t (as pictured above. I think its based on a sigma SG20. I've got a Sigma programmer coming in the post that i bought on ebay, but i've read that the system needs to be reset by BMW. Does anyone know if this is true? Is there a Sigma alarm that i replace the 3T box with and program new fobs to it? Any help appreciated really. The car is parked a few streets away under a tree and the pigeons are sh*tting on it [:(] cheers steve[:)][:)] |
Replies:
Posted By: dirtybeemer
Date Posted: 12-April-2006 at 21:44
| It sounds to me as though your fob wants reprogramming to your vehicle, i dont know how you reprogramme the fob as its not the same as the 5 series as the 5 series as the buttons for the alarm and to open the car are on the key itself, i had a simular thing happen to me where the alarm wouldnt turn off so i rang my BMW squealer and they told me to get in the car and start the engine and that should cancel the alarm but it didnt so i was driving in the hospital grounds with the alarm going the squealer said they could come and tow me in and have a look, yeah right at there prices i think not i managed to get round mine by reprogramming the key to the car, but for a fob i think its a main squealer job, you could try looking in your handbook under new transmitter and see if there is a proccedure for this like there is in the 5 series handbook. |
Posted By: schteev
Date Posted: 18-April-2006 at 18:04
|
Got hold of a sigma programer box..
SORTED! I reprogrammed keyfobs to the alarm, i can also turn on the Blips / Bleeps ond setup all the other stuff - Times / panic alarm / total closure etc.. Really cool. If anyone wants this doing in the bristol area get in touch steve@darda.co.uk S 
|