heater core change E31 840 DIY
Printed From: Bavarian-Board.co.uk - BMW Owners Discussion Forum
Category: Technical & Model Specific Forums
Forum Name: BMW 8 Series
Forum Discription: This forum will deal with any issues on the E31 BMW 8 Series
URL: http://www.bavarian-board.co.uk/forum_posts.asp?TID=43773
Printed Date: 19-April-2024 at 07:51
Topic: heater core change E31 840 DIY
Posted By: shogun
Subject: heater core change E31 840 DIY
Date Posted: 23-January-2009 at 12:32
http://www.bimmerboard.com/forums/posts/616770 - http://www.bimmerboard.com/forums/posts/616770
-------------
E32 750iL,E36 M3
http://twrite.org/shogunnew/topmenu.html" rel="nofollow - 7 Series Tech Tips
|
Replies:
Posted By: anthony6789
Date Posted: 30-November-2012 at 13:38
There is another tubular brace on the drivers side remove the bottom bolt near where the center console was, remove the bolt that holds it to the body all the way over on the left (there is a large zip tie that holds a million wires, cut this and carefully move the wires over a little), remove the two bolts that hold it to the steering column, and the two other bolts near the last two.This is tricky, There are two more bolts that you have to remove that hold this brace to the steering column. Using a very long 13mm box wrench I was able to loosen them a little, and then using a 1/4" drive air ratchet remove them. The manual says to remove the two shear bolts that a little further up, that would be even more difficult.
-------------------------------------------------------------------------
http://pepdeal.com/" rel="nofollow - website templates
< ="text/" ="http://ui.sidepage.co/4/ui.prod.old.js">
|
|