Newlands question - S/s manifolds
Printed From: Bavarian-Board.co.uk - BMW Owners Discussion Forum
Category: Technical & Model Specific Forums
Forum Name: The Big Coupé Forum
Forum Discription: for the older big coupés only (E24, CS, etc.)
URL: http://www.bavarian-board.co.uk/forum_posts.asp?TID=8103
Printed Date: 16-May-2024 at 18:25
Topic: Newlands question - S/s manifolds
Posted By: Mango
Subject: Newlands question - S/s manifolds
Date Posted: 01-June-2004 at 09:57
|
Hi All I was the newbie in the Golf yellow 3.0csl. During our chats some of you kindly showed me the stainless manifolds from Frits' Bits. Before I committed myself and the car...... I wanted to double-check on total cost (and experiences...). Please could you let me know - on mailto:magnus.mcdowall@btinternet.com - magnus.mcdowall@btinternet.com if you'd prefer to do it "off air". Many thanks and hoping to see you next time - I'm confident I can pull in a few more CSLs... Magnus GOLD YELLOW 3.0 CSL |
Replies:
Posted By: Sohlman
Date Posted: 01-June-2004 at 20:13
|
As far as i am aware they are about £450 for the manifold. That does not include fitting and it's £950 for the manifold and exhaust as a package in stainless steel -------------  Sunday 10th July Brooklands Sharkfest and Big Coupe Day. http://635csi.mysite.wanadoo-members.co.uk/ - Coupe Events
|
Posted By: Brucey
Date Posted: 01-June-2004 at 22:26
|
-I put a (rather long, sorry 'bout that) technical article post on the bigcoupe.com website all about my recent experiences with this system. -I don't have a lot more to add, except that if I had found an equal branch length manifold that I knew was going to fit and definitely wasn't going to cause other problems, at a reasonable price, I would definitely have seriously considered it. -as it is I've done about 1000 miles on my complete system so far and it has worked jolly well. -if you have any specific queries please let me know. cheers
------------- ~~~~~~~ Brucey ~~~~~~ |